When I apply "Minimum bandwidth" of "Network Adapter" which is below 10 Mbps, I found an error message.
Error applying Network Adapter changes
The operation failed.
Failed while applying switch port settings 'Ethernet Switch Port Bandwidth Settings' on switch 'VMNet 08': One or more arguments are in valid (0x80070057)
Resolution
The "Minimum bandwidth" bases on the maximum bandwidth of physical NICs. For example, My Hyper-V server was installed the 1 Gbps NIC so the minimum unit is 1% (10 Mbps) of Maximum bandwidth of the physical NIC. Although private virtual switches don't connect to the physical NICs. It is also affected.
The "Minimum bandwidth" bases on the maximum bandwidth of physical NICs. For example, My Hyper-V server was installed the 1 Gbps NIC so the minimum unit is 1% (10 Mbps) of Maximum bandwidth of the physical NIC. Although private virtual switches don't connect to the physical NICs. It is also affected.
This posting is provided “AS IS” with no warranties, and confers no rights!
according to Technet QoS Minimum Bandwidth Best Practices:
ReplyDeletehttp://technet.microsoft.com/en-us/library/jj735303.aspx#bkmk_guidelines
"The minimum unit is 1% of the link capacity. For example, if a Hyper-V Virtual Switch is connected to a 10 GB NIC, the minimum amount of bandwidth that you can allocate to a virtual network adapter connected to the switch is 100 MBPS."
so the minimum bandwidth for the 1GB NIC would be 10 Mbps.
Thanks for your information.
DeleteI am going to update the contents.